diff --git a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
index d448062..2454730 100644
--- a/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
+++ b/arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.c
@@ -672,12 +672,29 @@
 	{0xc200c, 0x0 /*NA*/, 0x1000000, {0x1000000}, 0, 0},
 	/* Phy0 register 3  - TX Channel control 0 */
 	{0xc400c, 0x0 /*NA*/, 0x1000000, {0x1000000}, 0, 0},
-	/* check PLLCAL_DONE is set and IMPCAL_DONE is set */
+	/* Decrease the amplitude of the low speed eye to meet the spec */
+	{0xc000c, 0x0 /*NA*/, 0xf000, {0x1000}, 0, 0},
+	{0xc200c, 0x0 /*NA*/, 0xf000, {0x1000}, 0, 0},
+	{0xc400c, 0x0 /*NA*/, 0xf000, {0x1000}, 0, 0},
+	/* Change the High speed impedance threshold */
+	{0xc0008, 0x0 /*NA*/, 0x700, {0x600}, 0, 0},
+	{0xc2008, 0x0 /*NA*/, 0x700, {0x600}, 0, 0},
+	{0xc4008, 0x0 /*NA*/, 0x700, {0x600}, 0, 0},
+	/* Change the squelch level of the receiver to meet the receiver electrical measurements (squelch and receiver sensitivity tests) */
+	{0xc0014, 0x0 /*NA*/, 0xf, {0x8}, 0, 0},
+	{0xc2014, 0x0 /*NA*/, 0xf, {0x8}, 0, 0},
+	{0xc4014, 0x0 /*NA*/, 0xf, {0x8}, 0, 0},
+	/* Check PLLCAL_DONE is set and IMPCAL_DONE is set */
 	{0xc0008, 0x0 /*NA*/, 0x80800000, {0x80800000}, 1, 1000},
-	/* check REG_SQCAL_DONE  is set */
+	/* Check REG_SQCAL_DONE  is set */
 	{0xc0018, 0x0 /*NA*/, 0x80000000, {0x80000000}, 1, 1000},
-	/* check PLL_READY  is set */
-	{0xc0000, 0x0 /*NA*/, 0x80000000, {0x80000000}, 1, 1000}
+	/* Check PLL_READY  is set */
+	{0xc0000, 0x0 /*NA*/, 0x80000000, {0x80000000}, 1, 1000},
+	/* Start calibrate of high seed impedance */
+	{0xc0008, 0x0 /*NA*/, 0x2000, {0x2000}, 0, 0},
+	{0x0, 0x0 /*NA*/, 0x0, {0x0}, 10, 0},
+	/* De-assert  the calibration signal */
+	{0xc0008, 0x0 /*NA*/, 0x2000, {0x0}, 0, 0},
 };
 
 /*